ETCR Electronic Technology Co Ltd
Please enter a valid keyword with 2 or more characters / numbers.
Disclaimer
Some links on this website may take you to other third-party sites and you acknowledge and agree that HKTDC and the HKTDC Affiliates have no responsibility for the accuracy or availability of any information provided by those linked websites.
Links to other websites do not constitute an endorsement by HKTDC of such websites or the Information, products, advertising, or other materials available on those websites.
Clamp-on Digital Ground Resistance Tester
Model No.:
ETCR2100C+
Brand:
ETCR
Colour:
Red, Black
Size:
260 x 90 x 66mm
Port:
Guangzhou
Minimum Order Quantity:
6 pc(s)
Description
Contact Supplier
Description
- The ETCR2100C+ model is designed for the evaluation of resistance measurement on earth probes with ground loop method without the disconnection of parts of plants under test.
- This type of measurement carried out by the instrument can be used for evaluation of single rods’ resistances within an earth installation assuming they do not affect each other.
- The inner part of the instrument is made of 2 toroids one for current and one for voltage.
- The voltage toroid generates a potential (E) on the loop during resistance measurement.
- A current (I) is consequently generated on the loop and is measured by the current jaws.
- Based on the value of parameters E and I the instrument displays the resistance value R calculated as their ratio.
- The ETCR2100C+ clamp also performs AC current up to 20A and leakage current with 0.1mA resolution and the setting of alarm thresholds on measurements is possible.
- The instrument is compliance with IEC/EN61010-1, CAT III 150V and is ideal for simple measurements both in domestic and industrial environments.
- CE mark.
- EN 61010-1.
- LVD directive 2006/95/EEC.
- EMC directive 2004/108/EEC.
- Resistance measurement on earth probes with ground loop method.
- Direct measurement on earth probes without any cable breaking.
- Measurement of leakage current on earth installations.
- Setting of alarm thresholds on measurements with buzzer.
- Storage of measurement results.
- Detection of current noise on measurement.
- Data hold function.
- Backlight.
- Auto power off.
- Resistive test loop.
- Rigid carrying case.
- Batteries.
- User manual.
- Data upload: RS232.
- 0.01-1200Ω; 0.0mA-20A.
- Resolution: 0.001Ω; 0.05mA.
- Sortable measurement data: 99 groups.
- Working temperature: -20-+55.
- Frequency: 50/60Hz automatism.
- Jaw: 32mm.
- OEM is welcome.
You may also like
Average Response Time
N/A
Supplier info last updated: 14 Jul 2019
Advertise since: 2 Aug 2010
Unfollow the following supplier?